The distance of insertion points from wound margins in interrupted and vertical mattress sutures influences the tensile load capacity: An in vitro experimental study.

AIM: To determine the tensile load capacity (TLC) and the tearing characteristics for interrupted and vertical mattress sutures with different insertion points from the wound margin, and the effect of the bite size when using vertical mattress sutures. MATERIALS AND METHODS: A total of 120 gingiva and lining mucosa samples obtained from pig jaws were divided into groups according to the suturing technique (interrupted and vertical mattress sutures), distance of the insertion points from the wound margin (margin, 1, 3, and 5 mm) and bite size (1, 3, and 5 mm). The TLC of the suture and the tearing characteristics were evaluated using a tensile tester device. RESULTS: The TLC was significantly higher for vertical mattress sutures than for interrupted sutures regardless of the distance of the insertion points from the wound margin (intergroup p < .001). This distance significantly influenced the TLC for vertical mattress sutures (p < .05) but not for interrupted sutures (p > .05). Testing the tearing characteristics revealed that no tissue tearing occurred in groups when the insertion points were more than 3 mm from the wound margin. CONCLUSION: The TLC is higher for vertical mattress sutures than for interrupted sutures, and it increases when the insertion points are farther from the wound margin.

Immediate loading on two adjacent single dental implants with definitive nonsplinted restorations: A proof of concept in the posterior zone.

OBJECTIVES: To evaluate clinical, clinician- and patient-reported outcomes (PROs) of two adjacent single posterior implants immediately loaded with definitive single crowns up to 1 year. Ten patients in need of two adjacent posterior single implants were included. All implants were placed applying a fully digital workflow. Definitive screw-retained single zirconia crowns were delivered within 72 h after implant placement. Clinical parameters, patient- and clinician-reported outcomes were assessed up to 1 year of follow-up. CLINICAL CONSIDERATIONS: Clinical outcomes remained stable, with no implant failures or technical and biological complications throughout the observation period. Patient satisfaction was very high at baseline (crown delivery) and remained consistently high at 6 and 12 months of follow-up. Crown insertion 3 days after implant placement was rated as an easy procedure by clinicians. CONCLUSIONS: Two adjacent single implants with immediate definitive restorations (<72 h) in the posterior region appear to be a viable and easy treatment option to shorten the overall treatment time and potentially enhancing patient satisfaction. However, randomized controlled trials are needed to confirm the advantages of this treatment protocol over a delayed loading approach. CLINICAL SIGNIFICANCE: In selected cases, immediate implant loading with definitive restorations in the posterior region appears a valuable and straightforward option to shorten the overall treatment time.

The use of digital technologies in peri-implant soft tissue augmentation - A narrative review on planning, measurements, monitoring and aesthetics.

OBJECTIVE: To identify the different uses and modalities of digital technologies to diagnose, plan and monitor peri-implant soft tissue conditions and aesthetics. METHODS: A comprehensive narrative review of pertinent literature was conducted, critically appraising key digital technologies that may assist peri-implant soft tissue augmentation and assessment. An electronic search on four databases including studies published prior to 1st July 2023 was performed and supplemented by a manual search. RESULTS: Predominantly, tools such as cone beam computed tomography (CBCT), intraoral scanning (iOS), intraoral ultrasonography and digital spectrophotometry were commonly to assess and monitor peri-implant soft tissues. The main clinical and research applications included: (i) initial assessment of mucosal thickness, supra-crestal tissue height and keratinized mucosa width, (ii) evaluation of peri-implant soft tissue health and inflammation, (iii) monitoring profilometric changes and midfacial mucosal margin stability over time and (iv) aesthetic evaluation through colour assessment. While evidence for some digital tools may be limited, the integration of digital technologies into peri-implant soft tissue management holds great promise. These technologies offer improved precision, comfort and speed in assessment, benefiting both patients and clinicians. CONCLUSION: As digital technologies progress, their full potential in peri-implant soft tissue augmentation and their value will become more evident with ongoing research. Embracing these innovations and their potential benefits is recommended to ensure that during progress in implant dentistry, patient care is not hindered.

Alveolar ridge changes 1-year after early implant placement, with or without alveolar ridge preservation at single-implant sites in the aesthetic region: A secondary analysis of radiographic and profilometric outcomes from a randomized controlled trial.

OBJECTIVES: To assess both the radiographic and profilometric outcomes of early implant placement with or without alveolar ridge preservation (ARP) (using two different ARP techniques) after 1 year of loading. MATERIALS AND METHODS: Seventy-five patients with a failing single tooth in the anterior maxilla were randomly allocated to three groups (1:1:1): (a) ARP using demineralized bovine bone mineral containing 10% collagen (DBBM-C) covered by a collagen matrix (CM), (b) ARP using DBBM-C covered with a palatal graft (PG), and (c) unassisted socket healing (control). Eight weeks after tooth extraction, early implant placement was performed in all patients. Cone-beam computed tomography (CBCT) and impressions were taken 8 weeks after tooth extraction (ARP/unassisted healing) prior to implant placement and 1-year post-loading. Radiographic and profilometric outcomes were evaluated. RESULTS: Out of the 70 patients available for re-examination at 1-year post-loading, 55 datasets could be assessed (ARP-CM 19; ARP-PG 17; Control 19). The need for additional guided bone regeneration (GBR) at implant placement amounted to 31.6% (ARP-CM), 29.4% (ARP-PG), and 68.4% (unassisted healing). Adjusted models revealed that residual buccal bone height and additional GBR at implant placement significantly influenced the magnitude of the alveolar changes at 1 year (p < 0.05). In patients with ARP (group ARP-CM or ARP-PG) without additional GBR, the presence of bone convexity amounted to 36.0% (9/25) at 1-year post-loading. For patients that received ARP and additional GBR at implant placement, the frequency of bone convexity increased to 72.7% (8/11) (p = 0.042). Regarding profilometric measurements, a tendency toward agreement with radiographic outcomes was observed. CONCLUSIONS: Early implant placement with ARP can attenuate alveolar ridge changes at 1-year post loading by minimizing both radiographic and profilometric alterations. However, early implant placement with simultaneous GBR consistently yields superior radiographic and profilometric outcomes, regardless of whether ARP is performed.

Pilot Study: Periosteal Mattress Sutures as an Alternative to Pins and Screws in Guided Bone Regeneration in the Esthetic Zone.

OBJECTIVES: To quantify the buccal bone thickness, area, and perimeter following guided bone regeneration (GBR) using stabilizing periosteal sutures. The loss in hard tissue volume may impair proper implant placement. GBR has been used to regenerate the lost alveolar ridge prior to or at the same time as dental implant placement. The most important factor for GBR success is graft stability. The periosteal mattress suture (PMS) stabilizing technique is an alternative to pins and screws to stabilize bone grafting material and has the advantage of not requiring the removal of the fixing devices. MATERIALS AND METHODS: A CBCT was acquired before and 6 months after surgery from six patients who underwent GBR with the PMS stabilizing technique. Images were analyzed for buccal bone thickness, area, and perimeter. RESULTS: The mean change in buccal bone thickness was 3.42 mm (± 1.31 SD) and proved statistically significant (P = .005). The mean change in bone crest area also proved statistically significant (P = .001). No significant difference was found in bone perimeter (P = .12). CONCLUSIONS: The PMS technique delivered optimal results without clinical complications. This study shows the potential of this technique as an alternative to pins or screws for graft stabilization in the esthetic zone.

Epidemiology of mid-buccal gingival recessions according to the 2018 Classification System in South America: Results from two population-based studies.

AIM: The aim of this investigation was to estimate the prevalence, severity and extent of mid-buccal gingival recessions (GRs; classified according to the 2018 Classification System) and to identify their risk indicators in the South American population. MATERIALS AND METHODS: Epidemiological data from two cross-sectional studies-performed on 1070 South American adolescents and 1456 Chilean adults-were obtained. All participants received a full-mouth periodontal examination by calibrated examiners. GR prevalence was defined as the presence of at least one mid-buccal GR ≥ 1 mm. GRs were also categorized into different recession types (RTs) according to the 2018 World Workshop Classification System. Analyses for RT risk indicators were also performed. All analyses were carried out at the participant level. RESULTS: The prevalence of mid-buccal GRs was 14.1% in South American adolescents and 90.9% in Chilean adults. In South American adolescents, the prevalence of RTs was 4.3% for RT1 GRs, 10.7% for RT2 GRs and 1.7% for RT3 GRs. In Chilean adults, the prevalence of RT1 GRs was 0.3%, while the prevalence of RT2 and RT3 GRs was 85.8% and 77.4%, respectively. Full-Mouth Bleeding Score (FMBS; <25%) was associated with the presence of RT1 GRs in adolescents. The risk indicators for RT2/RT3 GRs mainly overlapped with those for periodontitis. CONCLUSIONS: Mid-buccal GRs affected 14.1% of South American adolescents, whereas they affected most of the Chilean adult population (>90%). While RT1 GRs are more commonly observed in a non-representative cohort of South American adolescents (when compared to Chilean adults), the majority of Chilean adults exhibit RT2/RT3 GRs.

Dimensional changes after horizontal and vertical guided bone regeneration without membrane fixation using the retentive flap technique: A 1-year retrospective study.

AIM: To evaluate the dimensional changes after horizontal and vertical guided bone regeneration (GBR) without membrane fixation using the retentive flap technique. METHODS: This study retrospectively examined two cohorts that received vertical or horizontal ridge augmentations (VA or HA groups). GBR was performed using particulate bone substitutes and resorbable collagen membranes. The augmented sites were stabilized using the retentive flap technique without any additional membrane fixation. The augmented tissue dimensions were assessed using cone-beam computed tomography at preoperative, immediately postoperative (IP), 4 months (4M), and 1 year (1Y). RESULTS: Postoperative vertical bone gain in 11 participants of VA group amounted to 5.96 ± 1.88 mm at IP, which decreased to 5.53 ± 1.62 at 4M and to 5.26 ± 1.52 mm at 1Y (intragroup p < 0.05). The horizontal bone gain at IP in 12 participants amounted to 3.98 ± 2.06 mm, which decreased to 3.02 ± 2.06 at 4M and to 2.48 ± 2.09 mm at 1Y (intragroup p < 0.05). The mean implant dehiscence defect height after 1Y was 0.19 ± 0.50 mm in the VA group, and 0.57 ± 0.93 mm in the HA group. CONCLUSION: GBR without membrane fixation using the retentive flap technique seems to preserve the radiographic bone dimensions of vertically augmented sites. This technique may be less effective at preserving the width of the augmented tissue.

The L-shape technique in guided bone regeneration with simultaneous implant placement in the esthetic zone: A step-by-step protocol and a 2-14 year retrospective study.

OBJECTIVES: To describe the methodology of the "L-shape" technique in guided bone regeneration (GBR) with simultaneous implant placement and report on the clinical, esthetic, and patient satisfaction outcomes up to 14 years of follow-up. MATERIAL AND METHODS: Fourteen patients treated with the "L-shape" technique were included in this retrospective study. The L-shape technique was performed by trimming and placing a soft-type bone block made of deproteinized bovine bone mineral with 10% collagen at the buccal-occlusal aspect of the dental implant. The remaining gaps were filled with deproteinized bovine bone mineral granules and the augmented area was covered with a collagen membrane. The following parameters were recorded:  probing depth (PD), bleeding on probing (BOP), plaque index (PI), keratinized tissue width (KT) and marginal bone level (MBL). Esthetic outcomes were assessed according to the pink esthetic score (PES) and the white esthetic score (WES). Patient satisfaction was evaluated by means of a numerical rating scale (0-10). The stability of each augmented site was assessed by measuring the volumetric changes between baseline (crown delivery) and the respective follow-up. RESULTS: A total of 13 maxillary incisors and one maxillary canine in 14 patients were included. The mean follow-up period was 7.7 ± 3.8 years. PES values amounted to 10.7 ± 3.3 and WES to 8.8 ± 1.4. Patient satisfaction reached 9.4 ± 0.8. Mean PD at implant sites were 2.7 ± 0.7 mm while BOP amounted to 15.0 ± 0.2% and Pl to 5.0 ± 0.0%. Volumetric analyses revealed minimal changes at the augmented sites irrespective of the region of interest. Radiographic MBL remained relatively stable. CONCLUSIONS: Within the limitation of the present study the L-shape augmentation procedure seems to be a reliable technique when performing GBR with simultaneous implant placement in the esthetic zone. Outcomes encompassed stable clinical and esthetic results accompanied by high levels of patient satisfaction. Future randomized controlled trials are warranted to confirm possible benefits of the L-shape technique over traditional approaches. CLINICAL SIGNIFICANCE: The L-shape appears to be a simple yet promising technique in GBR with simultaneous implant placement that can easily be translated into clinical practice.

Effect of collagen membrane fixation on ridge volume stability and new bone formation following guided bone regeneration.

AIM: To test the effect of membrane fixation on ridge volume stability and new bone formation using guided bone regeneration. MATERIALS AND METHODS: In eight beagle dogs, after bilateral extraction of the maxillary pre-molars, a box-shaped defect was created on each side. All defect sites were augmented with a particulate bone substitute material, covered with either one of two non-cross-linked collagen membranes (CM1 or CM2) with or without fixation (-F or -UF). Samples were collected after 8 weeks. Histomorphometric and micro-computed tomography analyses were performed. RESULTS: Membrane fixation made no significant difference to the total augmented volume for both membranes (p > .05). Histological data indicated that at the ridge crest the augmented tissue width amounted to 2.4 ± 0.4 mm in the group CM1-F and 2.4 ± 0.5 mm in the group CM1-UF, with no significant difference between the groups. Conversely, in CM2-F the augmented tissue width was significantly larger than in CM2-UF (2.3 ± 0.1 vs. 1.57 ± 0.27, p < .05). CONCLUSIONS: Membrane fixation in contained defects failed to improve ridge volume stability regardless of the membrane type. However, it may enhance the width of the augmented ridge at the coronal portion depending on the type of membrane.

Vertical ridge augmentation feasibility using unfixed collagen membranes and particulate bone substitutes: A 1- to 7-year retrospective single-cohort observational study.

AIM: To determine whether vertical ridge augmentation (VRA) can be obtained through guided bone regeneration (GBR) using exclusively resorbable collagen membranes and particulate bone substitutes without additional stabilization. MATERIALS AND METHODS: This study retrospectively examined 22 participants who underwent VRA with staged or simultaneous implant placement. The vertical defects of all participants were filled with particulate bone substitutes and covered with resorbable collagen membranes. The augmented sites were stabilized with unfixed collagen membranes and the flap without any additional fixation. The augmented tissue height was assessed using cone-beam computed tomography at baseline, immediately after surgery, and at annual follow-ups. RESULTS: The vertical bone gain of the 22 augmented sites amounted to 6.48 ± 2.19 mm (mean ± SD) immediately after surgery and 5.78 ± 1.72 mm at 1- to 7-year follow-up. Of the 22 augmented sites, 18 exhibited changes of less than 1 mm, while the other 4 showed changes of greater than 1 mm. Histological observation of three representative cases revealed new bone apposition on the remaining material. CONCLUSION: The present findings indicate that GBR procedures using exclusively collagen membranes and particulate biomaterials without any additional fixation are feasible options for VRA.

Membrane fixation enhances guided bone regeneration in standardized calvarial defects: A pre-clinical study.

AIM: To determine whether collagen membrane (CM) fixation enhances guided bone regeneration in standardized defects. MATERIALS AND METHODS: Four 8-mm-diameter defects were surgically made in eight rabbit calvaria, and randomly allocated into four groups: control (empty), unfixed-CM, fixed-CM, and unfixed-CM with bone graft (BG + CM) (positive control). After 1- and 4-week healing periods, the animals were sacrificed and quantitative reverse transcription polymerase chain reaction, micro-computed tomography, and histological outcomes were assessed. RESULTS: At week 1, the expression levels of BMP-2, FGF-2, VEGF, and osteocalcin were significantly higher in the fixed-CM group than in the unfixed-CM and control groups (p < .05). Conversely, cathepsin-K was significantly expressed in the unfixed-CM group. No significant differences in expression markers were observed between the fixed-CM and BG + CM groups (p > .05). At week 4, new bone formation was significantly higher in the fixed-CM group than the unfixed-CM and control groups (p < .05), but similar to the BG + CM group (p > .05). CONCLUSIONS: CM fixation enhances the expression of osteogenic factors similar to BG + CM, leading to significantly more new bone formation. This suggests that the osteogenic potential is greater when membranes are fixed, thereby limiting the necessity of membrane-supporting materials to enhance bone formation.

Two short implants versus one short implant with a cantilever: 5-Year results of a randomized clinical trial.

AIM: To test whether or not the use of a short implant with a cantilever results in similar clinical and radiographic outcomes compared to two adjacent short implants with single tooth reconstructions. MATERIALS AND METHODS: Thirty-six patients with two adjacent missing teeth in the posterior region were randomly assigned to receive either a single 6-mm implant with a cantilever (ONE-C) or two 6-mm implants (TWO). Fixed reconstructions were inserted 3-6 months after implant placement and patients were re-examined up to 5 years (FU-5). RESULTS: A total of 26 patients were available for re-examination at FU-5. The survival rate amounted to 84.2% in ONE-C and to 80.4% in TWO (inter-group: p = .894). Technical complication rates amounted to 64.2% (ONE-C) and to 54.4% (TWO) (inter-group: p = 1.000). From baseline to FU-5, the median changes of the marginal bone levels were 0.13 mm in ONE-C and 0.05 mm in TWO (inter-group: p = .775). Probing depth, bleeding on probing, and plaque control record values showed no significant differences between the two treatment modalities (p > .05). CONCLUSIONS: Short implants with a cantilever render similar clinical and radiographic outcomes compared to two adjacent short implants at 5 years, however, they tend to fail at earlier time points suggesting an overload of the implants. Considering the modest survival rates, the clinical indication of either treatment option needs to be carefully evaluated. ClinicalTrials.gov (NCT01649531).

Osteoconductive properties of upside-down bilayer collagen membranes in rat calvarial defects.

BACKGROUND: Bilayer collagen membranes are routinely used in guided bone/tissue regeneration to serve as osteoconductive scaffolds and prevent the invasion of soft tissues. It is recommended to place the membranes with their dense layer towards the soft tissue and their porous layer towards the bony defect area. However, evidence supporting this recommendation is lacking. This study aimed to determine whether the alignment of bilayer collagen membranes has an effect on bone regeneration. METHODS: In two groups of ten male Sprague-Dawley rats each, a 5-mm calvarial defect was created. Thereafter, the defect was randomly covered with a bilayer, resorbable, pure type I and III collagen membrane placed either regularly or upside-down (i.e., dense layer towards bone defect). After 4 weeks of healing, micro-computed tomography (µCT), histology, and histomorphometry of the inner cylindrical region of interest (4.5 mm in diameter) were performed to assess new bone formation and the consolidation of the collagen membrane in the defect area. RESULTS: Quantitative µCT showed similar bone volume (median 8.0 mm3, interquartile range 7.0-10.0 vs. 6.2 mm3, 4.3-9.4, p = 0.06) and trabecular thickness (0.21 mm, 0.19-0.23 vs. 0.18 mm, 0.17-0.20, p = 0.03) between upside-down and regular placement, both leading to an almost complete bony coverage. Histomorphometry showed comparable new bone areas between the upside-down and regularly placed membranes, 3.9 mm2 (2.7-5.4) vs. 3.8 mm2 (2.2-4.0, p = 0.31), respectively. Both treatment groups revealed the same regeneration patterns and spatial distribution of bone with and without collagen fibers, as well as residual collagen fibers. CONCLUSIONS: Our data support the osteoconductive properties of collagen membranes and suggest that bone regeneration is facilitated regardless of membrane layer alignment.

Proteomic and genomic analysis of acid dentin lysate with focus on TGF-ß signaling.

Particulate autologous tooth roots are increasingly used for alveolar bone augmentation; however, the proteomic profile of acid dentin lysate and the respective cellular response have not been investigated. Here we show that TGF-ß1 is among the 226 proteins of acid dentin lysate (ADL) prepared from porcine teeth. RNA sequencing identified 231 strongly regulated genes when gingival fibroblasts were exposed to ADL. Out of these genes, about one third required activation of the TGF-ß receptor type I kinase including interleukin 11 (IL11) and NADPH oxidase 4 (NOX4). Reverse transcription-quantitative polymerase chain reaction and immunoassay confirmed the TGF-ß-dependent expression of IL11 and NOX4. The activation of canonical TGF-ß signaling by ADL was further confirmed by the phosphorylation of Smad3 and translocation of Smad2/3, using Western blot and immunofluorescence staining, respectively. Finally, we showed that TGF-ß activity released from dentin by acid lysis adsorbs to titanium and collagen membranes. These findings suggest that dentin particles are a rich source of TGF-ß causing a major response of gingival fibroblasts.

Acid Dentin Lysate Failed to Modulate Bone Formation in Rat Calvaria Defects.

Autogenous tooth roots are increasingly applied as a grafting material in alveolar bone augmentation. Since tooth roots undergo creeping substitution similar to bone grafts, it can be hypothesized that osteoclasts release the growth factors stored in the dentin thereby influencing bone formation. To test this hypothesis, collagen membranes were either soaked in acid dentin lysates (ADL) from extracted porcine teeth or serum-free medium followed by lyophilization. Thereafter, these membranes covered standardized 5-mm-diameter critical-size defects in calvarial bone on rats. After four weeks of healing, micro-computed tomography and histological analyses using undecalcified thin ground sections were performed. Micro-computed tomography of the inner 4.5 mm calvaria defects revealed a median bone defect coverage of 91% (CI: 87-95) in the ADL group and 94% (CI: 65-100) in the control group, without significant differences between the groups (intergroup p > 0.05). Furthermore, bone volume (BV) was similar between ADL group (5.7 mm3, CI: 3.4-7.1) and control group (5.7 mm3, CI: 2.9-9.7). Histomorphometry of the defect area confirmed these findings with bone area values amounting to 2.1 mm2 (CI: 1.2-2.6) in the ADL group and 2.0 mm2 (CI: 1.1-3.0) in the control group. Together, these data suggest that acid dentin lysate lyophilized onto collagen membranes failed to modulate the robust bone formation when placed onto calvarial defects.

Short communication: Cemented implant reconstructions are associated with less marginal bone loss than screw-retained reconstructions at 3 and 5 years of loading.

OBJECTIVES: To analyse whether there is a difference in marginal bone levels (MBL) and the respective changes between cemented and screw-retained reconstructions at 3 and 5 years of loading. METHODS: Radiographic data from 14 prospective multicentre clinical trials following implant loading with fixed cemented (CEM) or screw-retained (SCREW) reconstructions with a 3- to 5-year follow-up were retrieved from a database. MBL and MBL changes were assessed at initiation of implant loading (BL), at 3 (FU-3) and 5 years (FU-5) thereafter. The presence of peri-implantitis was also determined. RESULTS: Data from 1,672 implants at BL, 1,565 implants at FU-3 and 1,109 implants at FU-5 were available. The mean MBL amounted to 0.57 mm (SD 0.87) at BL, 0.55 mm (SD 0.86) at FU-3 and 0.65 mm (SD 1.18) at FU-5. At FU-3, the mean MBL was 0.44 mm (SD 0.65) in group CEM and 0.63 mm (SD 0.99) in group SCREW showing a significant difference between the groups (intergroup <0.05). At FU-5, the mean MBL was 0.42 mm (SD 0.77) in CEM and 0.80 mm (SD 1.37) in SCREW, again with significant differences between both groups (p < .05). MBL changes between BL and FU-3 amounted to 0.11 mm (SD 1.02) (bone loss) in SCREW and -0.17 mm (SD 1.03) (bone gain) in CEM. Similarly, mean MBL changes from BL to FU-5 amounted to 0.23 mm (SD 1.31) (bone loss) in SCREW and -0.26 mm (SD 1.27) (bone gain) in CEM. The prevalence of peri-implantitis amounted to 6.9% in CEM and 5.6% in group SCREW (intergroup p = .29063) at FU-3. At FU-5, peri-implantitis amounted to 4.6% in CEM and 6.2% in group SCREW (intergroup p = .28242). CONCLUSION: Cemented implant reconstructions compared with screw-retained reconstructions revealed higher marginal bone levels and similar rates of peri-implantitis during 5 years. The difference in MBL and the respective changes between the two groups, however, appear to be clinically negligible.

Clinical effects of probiotic or azithromycin as an adjunct to scaling and root planning in the treatment of stage III periodontitis: a pilot randomized controlled clinical trial.

BACKGROUND: The aim of this triple-blind placebo-controlled parallel-arm randomized clinical trial was to evaluate the clinical effects of Lactobacillus rhamnosus SP1 or azithromycin as an adjunct to scaling and root planing (SRP) in patients with stage III periodontitis. METHODS: Forty-seven systemically healthy participants with stage III periodontitis were recruited. Following SRP, the participants were randomly assigned to one of three treatment modalities; (1) placebo (n = 15), (2) probiotics (n = 16) and (3) antibiotics-azithromycin (n = 16). The participants were monitored at baseline, 3, 6, 9 and 12 months after therapy. Probing pocket depth (PPD), bleeding on probing (BOP), clinical attachment loss (CAL) and plaque accumulation (PI) were evaluated. RESULTS: All 47 participants completed the study. At 12 months, all groups showed significant improvements of PPD and PI (p < 0.012) irrespective of the treatment modality and without significant differences between the groups. Probiotics and azithromycin showed no added benefit in terms of CAL. While the placebo (p = 0.002) and the antibiotic-azithromycin (p = 0.002) group showed a significant reduction of BOP, only the placebo group revealed a significant reduction of CAL at 12 months follow-up (p = 0.003). The number of sites and teeth with PPD ≥ 5, ≥ 6 and ≥ 7 mm were significantly reduced in all groups at 12 months follow-up (p < 0.025) irrespective of the treatment regime and without significant differences between the groups. CONCLUSION: The use of probiotics or azithromycin as an adjunct to SRP failed to provide additional benefits in the treatment of stage III periodontitis. The benefits of these two treatment regimes as an adjunct to SRP remain unclear. TRIAL REGISTRATION: NCT02839408, 10/28/2017, Clinicaltrial.gov.

Acid bone lysates reduce bone regeneration in rat calvaria defects.

Acid bone lysates (ABLs) represent the growth factors and other molecules released during autologous graft resorption. However, the impact of these bone-derived growth factors on the healing of bone defects has not yet been investigated. The aim of the present study was, therefore, to examine the impact of ABLs adsorbed to collagen membranes on bone regeneration. To this end, in 16 female Sprague Dawley rats, a standardized 5-mm-diameter critical size defect on the calvarial bone was created. The defects were covered with collagen membranes that had been soaked either in serum-free media or ABLs followed by lyophilization. After a healing period of 4 weeks, micro-computed tomography (µCT) and histological analyses by means of undecalcified thin ground sections were performed. µCT analysis of the inner 4 mm of the calvaria defect showed a greater bone defect coverage in the control group when compared to ABL group, 29.8% (confidence interval [CI]: 17.7-50.3) versus 5.6% (CI: 1.0-29.8, p = .03), respectively. Moreover, we found significantly more absolute bone volume (BV) in the control group when compared to ABL group, 0.59 mm3 (CI: 0.27-1.25) versus 0.07 mm3 (CI: 0.06-0.59, p = .04), respectively. Histomorphometry confirmed these findings with a relative BV in the central compartment of 14.1% (CI: 8.4-20.6) versus 5.6% (CI: 3.4-7.9, p = .004), respectively. These findings indicate that bone-derived growth factors contained in ABLs are able to attenuate bone regeneration within collagen membranes.

Caspase inhibitor attenuates the shape changes in the alveolar ridge following tooth extraction: A pilot study in rats.

OBJECTIVE: The aim of the study was to determine whether the inhibition of apoptosis via pan-caspase inhibitors can attenuate the changes in the alveolar ridge upon tooth extraction. BACKGROUND: Cells undergoing apoptosis might play a central role in the onset of alveolar bone resorption and the ensuing bone atrophy following tooth extraction. Caspases are proteases that regulate apoptotic cell death. It is, therefore, reasonable to hypothesize that blocking apoptosis with pan-caspase inhibitors attenuates the changes in the alveolar ridge following tooth extraction. METHODS: In 16 inbred rats, the mandibular first (M1) and second (M2) molars of one side were extracted. Following random allocation, the rats received either a cell-permeable pan-caspase inhibitor or diluent. After a healing period of 10 days, changes in shape and height of the alveolar ridge were examined using geometric morphometrics and linear measurements based on micro-computed tomography. RESULTS: Geometric morphometric analysis revealed that the pan-caspase inhibitor prevented major shape changes of the alveolar ridge following M1 tooth extraction (P < .05). Furthermore, linear measurements confirmed that the pan-caspase inhibitor significantly prevented the atrophy of the alveolar ridge height following M1 tooth extraction compared to the diluent controls (-0.53 mm vs -0.24 mm; P = .012). M2 tooth extraction caused no shape changes of the alveolar ridge, and thus, the pan-caspase inhibitor group did not differ from the control group (-0.14 mm vs -0.05 mm; P = .931). CONCLUSIONS: These findings suggest that the inhibition of apoptosis may attenuate shape changes of the alveolar ridge following M1 tooth extraction in rodents.

Impact of DBBM Fragments on the Porosity of the Calvarial Bone: A Pilot Study on Mice.

Deproteinized bovine bone mineral (DBBM) is brittle and can break into fragments. Here, we examined whether DBBM fragments have an impact on mice calvarial bone during bone augmentation. DBBM was either randomly crushed (DBBM fragments) or left undisturbed (DBBM granules). Then, DBBM fragments or original DBBM granules were placed onto calvarial bone in 20 BALB/c mice. Following random allocation, ten mice received DBBM fragments and ten mice received original DBBM granules. After fourteen days of healing, micro computed tomography (micro-CT) and histological analysis of the augmented sites were performed. The primary outcome was the porosity of the calvarial bone. The micro-CT analysis revealed that DBBM fragments failed to significantly change the porosity of the calvarial bone as compared with original DBBM granules, despite the slightly higher bone resorption in the DBBM fragment group, 10.3% (CI 6.3-11.6) versus 6.1% (CI 4.1-7.8, p = 0.355), respectively. The cortical bone volume was not altered by DBBM fragments as compared with original DBBM granules, i.e., 79.0% (CI 78.9-81.2) versus 81.5% (CI 80.1-83.3, p = 0.357), respectively. The DBBM fragment group revealed similar bone thickness values as compared with the DBBM granules group, i.e., 0.26 mm (CI 0.23-0.29) versus 0.25 mm (CI 0.22-0.27, p = 0.641), respectively. The histological evaluation supported the micro-CT observations, displaying minor signs of porosity and resorption. The particle-size distribution analysis confirmed a shift towards smaller particle sizes in the DBBM fragment group. These findings suggest that DBBM fragments behave similarly to original DBBM granules in terms of bone morphological changes at augmented sites.